How to pack magnets to isolate them from htmagnets?

The methods of magnetic isolation of magnet packaging mainly include the use of foam board and magnetic isolation board. The foam board is used to protect the magnet, while the magnetic isolation board is used to shield or redirect the magnetic field to prevent it from affecting the surrounding objects. one

The specific packaging steps of htmagnets are as follows:

1.Use foam board and magnetic isolation board: first, use foam board to wrap the magnet to provide initial protection. Then, magnetic isolation plates are placed on the foam board, usually using thin iron sheets as magnetic isolation materials. These magnetic isolation plates are placed inside the foam board to shield or redirect the magnetic field.

2.Use an eight-hole foam box with special outlet: For export packaging, you can use an eight-hole foam box with special outlet. There are six thin iron sheets in this box, which are used to shield or redirect the magnetic field from neodymium magnets to ensure that it will not affect other packages or aircraft during transportation.

3.Use cartons and magnetic separators: For air packaging, magnets need to be placed in cartons and magnetic separators should be placed inside cartons. Mark the outside of the carton so that customers can know the quantity information of each box of products.

In addition, if it is necessary to use a magnet near the electronic door, you can wrap the magnet with a magnetic isolation material, such as a shielding box made of high magnetic permeability materials such as permalloy and silicon steel sheet. These materials can effectively isolate the magnetic field and avoid triggering the electronic door alarm.